Last Modified: 11-29-2007 1.6 A
Service Category: Engine/Hybrid System Section: Cruise Control
Model Year: 2008 Model: Sequoia Doc ID: RM000002VLW002X
Title: CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH

(a) Install the switch, as shown in the illustration.

(b) Install the 2 screws.

(c) Connect the connector.

2. INSTALL STEERING PAD SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION (2008 Sequoia)+

3. INSTALL LOWER NO. 3 STEERING WHEEL COVER SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION (2008 Sequoia)+

4. INSTALL LOWER NO. 2 STEERING WHEEL COVER SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION (2008 Sequoia)+

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 Sequoia) .

Torque: 5.4 N·m (55 kgf·cm, 48 in·lbf)

6. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DIAGNOSIS SYSTEM (2008 Sequoia) .